SATEC Vertical Intensive Mixer Control Cabinet

1）The first row above the front of the control cabinet door is the running hour counter. Once the mixing pan starts to run, the running time is calculated.

2）The second row above the front of the control cabinet door from left to right is as follows；

☑Controls the voltage switch, may command to turn off the control voltage;

□Control voltage start, can command to open control voltage;

□Fault buzzer, every new fault will activate buzzer.

□Fault Recognition Button, press this button to turn off the buzzer, but the fault has not been recognized.

3）The third row above the front of the control cabinet door from left to right is as follows:

□Activate the key switch for on-site operation to display the safety status of the mixer, such as the indicator light is always on, indicating the safety of the mixer (pan protection and input door OK); if the indicator light flickers, indicating the safety alarm of the mixer (pan protection and input door is opened);

□Fault Recognition (Accreditation) Key。

4）In the middle of the bottom row above the front of the cabinet door is the stop button (red).